Speedometer Disc for Mercedes W116 450 SEL S Class 170 Mph to 270 Kmh

SKU: 8846
Category: Mph to Kmh
Manufacturers:

Variant
Design
Change Part Number
Only if bought serial number - 116 542 ????: Only if bought serial number - 116 542 ????
Kmh or Mph

from

74,99 €

incl. 19% VAT , plus

Delivery time: 2 - 5 weeks (DE - int. shipments may differ)

Look at the pictures above the originals speedometer disc / s, we use these as a template.
(See picture Original Speedometer Disc)
Pay attention to the arrangement of the
Scaling, on the Numbers Design, on the Symbols, on the Color etc.
If your Speedometer Disc is a trifle different, such as the Pictured Original Speedometer Disc / s,
then you have a different Model with high probability
and this Disc is not suitable for your Speedometer.
If you are not sure, send us a Photo of your Speedometer + Model, Model Name, Year of Manufacture.
This Disc / s has been rescaled from an Original Mph Speedometer Disk / s to Kmh.
This guarantees a precise Display of the Speedometer in Kmh.

Variant - Plastic.
This 1.6mm thick flat Plastic Disk will / will be
very elaborate, printed directly with UV resistant inks. (no foil)
The surface corresponds approximately to the original disc (silk matt).
The disc / s are dimensionally stable and heat resistant.
The disc / s are completely finished punched out and thus ready for installation.
Our disc (s) will be replaced with the original disc (s).

Variant - Aluminium.
This 0.6mm thick flat Plastic Disk will / will be
very elaborate, printed directly with UV resistant inks. (no foil)
The surface corresponds approximately to the original disc (silk matt).
The disc / s are dimensionally stable and heat resistant.
The disc / s are completely finished punched out and thus ready for installation.
Our disc (s) will be replaced with the original disc (s).

Variant - you prepare the blank (s).

You prepare the blank (s) completely.
Before sanding, take a few good Photos of the Disk / s

Everything above the surface to be Printed must be turned off or bent over.
The stop for the Tachometer Needle must also be removed.
The Printer must be able to Drive freely over the surface.
Then sand the Disc / s and Paint in your desired color.
We then Print the Numbers and Scales Directly to the Disk (NO FOIL)

When replacing the Disc (s), the Speedometer must be opened and the Pointer (s) removed.

We recommend to have this done in a Specialist Workshop.
We are not liable for damages incurred!

Since we only get the Speedometer / s and not the complete Speedo from our Customers,
you will not receive Installation Instructions from us!

General information:
A possibly shown /// AMG, BMW M logo, Porsche, or another logo or lettering,
is an original logo or logo of the respective company and is subject to copyright.
That it is not incorporated into the disc and is not part of this offer.
We do not print or use any copyrighted trademarks and logos.
All designs, pictures, descriptions, instructions etc.
are copyrighted and may not be used without our personal permission.
Any infringement of copyright will be immediately displayed without warning.

Special Production:
Almost every item in our shop has the same options.
If you order a different design, logo, lettering, color of the disc, color of the numbers of the original disc / s when buying an item,
this is an individual production and can not be returned or exchanged.
If you change the standard numbers / scales color / s when buying an item, you do so at your own risk.
We are not liable for bad or no function. We always recommend colored fluoroscopy,
the conversion to original colored lighting or neutral white lighting.
Original speedometer discs are used and excluded from exchange.

If your original speedometer is not shown, we need the original templates.
It’s essential to get all original templates from you. (disc, rev meter, temperature display, fuel indicator etc.)
!!Attention!! Only send the disc/s not the whole speedometer. If it’s a MPH-speedometer, we will rescale them in km/h.
The easiest way is to send us the discs by post. You can find the address in the company Information.

You can also scan the original discs and send them to us by mail. Scan it with photoshop or the free program i_view32.
If the disc is too large for your scanner, then please scan the disc once from the left and once from the right. We reassemble the disc on the computer. Please also scan the back.
Please scan everything with 300 DPI and save it as JEPG. (with photoshop save as PSD)
Don’t change anything in adjustment (i_view32). This is the only way we will get the original size of the speedometer and it’s discs. For all other programs, the size is displayed incorrectly.

There are no reviews yet.